Fury Carbon Frameset

Developed in collaboration with our riders and racers around the world, we have engineered more adjustability and the most ‘shred for your bread’ into the newest evolution of Fury. Built for precision and speed, this tunable frame with high-pivot LTS suspension improves the bikes control and increases rider confidence whether it’s against the clock like the GT / Continental Factory Racing team or boosting the biggest lines in the park like Brage Vestavik.

Fury Blended Carbon frame
RockShox Super Deluxe Coil Ultimate DH RC2
29 and ‘MX’ wheel compatible

See Full Spec

MD LG XL

Color

Find a Dealer

Ruckus Management

Integrated chain guide prevents unwanted chain drops in rough conditions and custom chainstay and seat stay protection keeps the bike quiet so you can focus on what's in front of you instead of underneath.

Maximum Tunability

Three separate adjustments all with the flip of a chip. Pick and choose your wheel size, suspension progression, or rear center length for how you want the bike to ride. Onboard adjustments are a key rider benefits that let them fine tune the bike’s ride for any trail.

High Pivot LTS

High Pivot LTS delivers the utmost controlled and inspiring suspension performance making riders faster anywhere. Geometry and kinematics are designed and tailored to increase stability at any speed and maximize performance by eliminating pedal kickback and having an incredible amount of control under heavy braking.

Frame

frame Fury Carbon MX Frame, 200mm Travel, 12x148mm Rear Thru-Axle, 29" Wheel Ready

sizes available MD, LG, XL

rear shock RockShox Super Deluxe Coil Ultimate DH RC, 225x75mm Trunnion (Spring Rate: M - 500 Lbs/Inch, L/XL- 550 Lbs/Inch)

wheel size Mullet

Cockpit

headset FSA Orbit 1.5"

Please note that, based on component availability and other factors, specifications are subject to change without notice.

Fit Guide

XS: 4'8" - 5'1"
S: 5'0" - 5'6"
M: 5'5" - 5'11"
L: 5'10" - 6'2"
XL: 6'1" - 6'6"

Geometry

Sizes (mm)	MD	LG	XL
Seat tube length	410	420	430
Seat tube angle effective	75.0 °	75.0 °	75.0 °
Top tube horizontal	621	653	686
Top tube actual	546	577	609
Head tube angle	63.5 °	63.5 °	63.5 °
Seat tube angle	75.0 °	75.0 °	75.0 °
Standover	720	730	730
Head tube length	110	120	130
Wheelbase	1260	1295	1329
Front center	821	856	890
Fork rake	52	52	52
Trail	133	133	133
Stack	638	647	656
Reach	450	480	510
Travel front	203	203	203

Notes

Rear axle Flip Chip adjusts the Chainstay Length between 440mm and 450mm with a 29er rear wheel and 435mm and 445mm with a 27.5 rear wheel. No other frame geomtery changes when switching between 29 and 27.5 rear wheels when using the Flip Chip. The Shock Flip Chip changes shock progression and has no effect on frame geometry.

Is this bike eligible for GT Connect?

No, this bike is not eligible for GT Connect. Bikes purchased over $1000 from GTBicycles.com, can be assembled for free, by a local shop. Click here to learn more about GT Connect.

How do I adjust the flip chips on the Fury Carbon?

The Fury Carbon has three flip chips. One in the rear axle adjusting the wheel base and chainstay length, one at the bottom of the shock mount adjusting the progression, and one on the seatstays adjusting the geometry to accommodate both MX or 29er wheels. All adjustments can be done trail side with a multitool. The dropout flip chip provides +/-10mm of wheelbase allowing riders to choose between 435mm or 445mm length chainstays.

To adjust the dropout flip chip, simply remove the rear wheel, then pop out and flip around the thru-axle mounts to adjust them to either a short or long wheelbase. Lastly, unbolt and reblot the rear brake mount matching the wheelbase setting you chose.

To adjust the progression flip chip under the rear shock, simply unbolt the bottom shock mount bolt, then popout the hardware and flip it around. Then reinstall the shock and torque the bolt to 10Nm.

To adjust the seatstay flip chip to accommodate either MX or 29er wheels, simply unbolt and flip around the flip chip located at the top the seat stay. Then reinstall the bolt and tighten to 7Nm.

Click here to learn more.

What headset is used on the Fury Carbon?

The Fury uses a Semi-Integrated ZS49/28.6 top, ZS49/30 Lower headset.

What is the max rotor size for the rear brake on the Fury Carbon?

The max rotor size on the rear brake is a 223mm rotor. The native brake rotor size without an adapter is 200mm rotor.

What is the rear shock size used on the Fury Carbon?

The Fury Carbon uses a rear shock with an Eye-to-Eye / Stroke / Bushing Width of 225mm x 75mm Metric Trunnion/30mm x M10.

Are there bash guard mounts on the Fury Carbon?

Yes, the Fury Carbon has ISCG-05 bash guard mounts. Bash guard is not included.

Can I convert my Fury Carbon to 27.5" or MX wheels?

Yes, the Fury Carbon is compatible MX wheels, but not dual 27.5" wheels.

What is the max tire width on the Fury Carbon?

The max tire width is a 2.5in wide tire.

What derailleur hanger is used on the Fury Carbon?

The derailleur hanger is a TA ST SS 092. (Part #K33013)

What bottom bracket is used on the Fury Carbon?

The Fury uses a BSA/83m bottom bracket.

What is the max rider weight on the Fury Carbon?

The max rider weight is 305lbs/138kg.

Is touchup paint available?

Unfortunately, touchup paint is not available at this time as our paint codes are unique to our painter.

GT Tech Book

Search Site

Fury Carbon Frameset

Shipping Policy

Return Policy

Added To Cart

${ item.product_title }

You May Also Like

${ product.title }